Expert Tips for Maintaining Your Howard Miller Clock in Keller and Plano
- dfwclocks
- 5 days ago
- 3 min read
Howard Miller clocks are more than just timekeepers. They are heirlooms that carry history and craftsmanship, deserving careful attention to keep them running smoothly. If you own one in Keller, Plano, or nearby Southlake, you know how important it is to maintain its precision and charm. This guide offers practical tips to help you keep your Howard Miller heirloom ticking for generations with specialized care.
Check the Bushing for Wear
The bushing is a small but critical part of your clock’s movement. It supports the pivot points of the gears and keeps everything aligned. Over time, bushings can wear down, causing the clock to lose accuracy or stop altogether.
Inspect the movement plates for any signs of wear or oval-shaped holes.
Worn bushings should be replaced promptly to avoid further damage.
A professional can perform this inspection during routine maintenance.
Regular bushing checks help your clock maintain its smooth operation and prevent costly repairs.
Synchronize the Chimes with the Hands
Howard Miller clocks are famous for their Westminster chimes and other melodies. These chimes must strike at the right time to match the clock hands.
Listen carefully to the quarter-hour chimes and verify they align with the clock’s hands.
If the chimes are off, it can cause confusion and diminish the clock’s charm.
Adjusting chime synchronization requires skill and is best done by an expert.
Proper chime synchronization ensures your clock sounds as beautiful as it looks.
Level the Weights Correctly
Many Howard Miller models use heavy weights to power the clock mechanism. These weights must hang freely without rubbing against the case.
Check that the weights are level and not touching the sides of the clock.
Uneven or rubbing weights can cause the clock to stop or run inconsistently.
Adjust the weights carefully to maintain smooth movement.
Weight leveling is a simple step that protects your clock’s internal parts and keeps it running reliably.
Use Specialized In-Home Service in Keller and Southlake
Howard Miller clocks require expert care tailored to their unique design. DFW Clocks offers specialized in-home service in Keller and Southlake, bringing authorized-style maintenance directly to your door.
Technicians handle everything from bushing inspections to chime synchronization.
Mobile service means no need to transport your valuable clock.
Call 817-681-4567 to schedule an appointment and keep your Howard Miller heirloom ticking for generations.
This convenient service ensures your clock receives the attention it deserves without disrupting your home.
Keep Your Clock Clean and Dust-Free
Dust and dirt can interfere with the delicate mechanics inside your clock.
Use a soft, dry cloth to gently wipe the exterior surfaces.
Avoid using sprays or liquids that can seep inside and damage the movement.
Keep the clock in a stable environment away from direct sunlight and humidity.
Regular cleaning helps preserve the finish and prevents buildup that can affect performance.
Wind Your Clock Properly
If your Howard Miller clock is mechanical, winding it correctly is essential.
Follow the manufacturer’s instructions for winding frequency and direction.
Avoid over-winding, which can strain the springs.
Wind the clock at the same time each week to maintain consistent operation.
Proper winding habits extend the life of your clock’s movement and keep it accurate.
Monitor the Clock’s Level Position
A clock that is not level can cause the pendulum to swing unevenly, affecting timekeeping.
Use a small level to check that the clock stands straight on the floor or wall.
Adjust the feet or mounting hardware as needed.
A level clock runs more smoothly and keeps better time.
This simple check can prevent many common timing issues.
Keep your Howard Miller heirloom ticking for generations. Specialized in-home service in Keller and Southlake. Call 817-681-4567.
Comments